Microtec M163-2 Double input lambda module for auto tuning / mapping

Code M163-2 KIT
£0.00
£1,038.00
Inc VAT
£865.00
Exc VAT
Click the image to enlarge
Code M163-2 KIT
£0.00
£1,038.00
Inc VAT
£865.00 Exc VAT
Save
Earn 0 reward points with this product.
  • Description

    Microtec M163-2 , Double input lambda display and output module / CAN / Analogue 0-5v - With sensors

    Typically the M163 communicates with Microtec ECUs via CAN to allow closed loop mapping either on the dyno or as a 'self learn' during riding. 

    This module is not intended as a permanent on-board system for closed loop control, development and dyno only.

    Compatible with any type of ECU or dyno installation using one or more of the following outputs.

    • CAN at 1mbps with user programmable IDs
    • Two separate analogue , 1v = 10.2 AFR > 4v = 14.7 AFR

    Lambda sensors - Although based on the Bosch LS4 sensor, sensors are supplied in calibrated form, each sensor having a unique calibration code that is manually entered into the M163 module via the simple '2 button' control pad.

    Download the product : Manual

    Kit includes

    • 1 x M163-2 lambda module + base wiring**
    • 2 x calibrated lambda sensors

    **IMPORTANT - Additional wiring will be necessary to join this equipment to the ECU. There are however several options for this so please ask at the time of ordering.

    Features:

    • Heater control for 2 sensors
    • Sensor diagnostics
    • CAN and analogue output
    • 10.5 > 18v supply (typical up to 5A)
    • Simple system wiring
    • Easy to use
    • replacement lambda sensors sold separately. See options below.